Special Offers
|
|
|
|
|
|
Convection technology
Heat is mainly generated behind the heater in the space between the panel and the wall, which leads to an efficient up-draught of heat circulated into the room. (The heated air comes out from behind the heater at the speed of 0,7m per second!). This principle of natural convection means that about 90% of the heat in the room comes from the back of the panel, while only 10% is radiated from the front. Convection heating (room heater) is far more effective than radiated heating (freestanding, locality heater).
-
-
TECHNICAL SPECIFICATIONS
Approx Quantities:
1 heater per 12m2 (temperate climate)
1 heater per 9m2 (cold climate)Rating: 1.8 Amps @ 230V - 50 Hz
Ohm Reading: 127
Dimensions: 600mm x 600mm x 10mm
Max Temp: Approx 75 - 90° C, depending on the ambient temperature
Mass: 6kg (Unpackaged)Cable:
Cable: 2m, 2 core
Plug: 2 point (World market: depending on country specifications)
-
-
TECHNICAL SPECIFICATIONS
Approx Quantities:
2 heaters per 12m2 (temperate climate)
2 heaters per 9m2 (cold climate)Rating: 1.2 Amps @ 230V - 50 Hz
Ohm Reading: 205
Dimensions: 600mm x 450mm x 10mm
Max Temp: Approx 75 - 90° C, depending on the ambient temperature
Mass: 4.1kg (Unpackaged)
Cable: 2m, 2 core
Plug: 2 point (World market: depending on country specifications)